NTC Temperature Sensor
-
Digital DS18B20 Temperature Sensor for Vehicle
DS18B20 is a commonly used high precision single bus digital temperature measurement chip. It has the characteristics of small size, low hardware cost, strong anti-interference ability and high precision.
This DS18B20 temperature sensor takes DS18B20 chip as a core of temperature measurement, working temperature range is -55℃～+105℃. The deviation will be ±0.5℃ at the temperature range of -10℃～+80℃. -
IP68 Waterproof Straight Probe Temperature Sensor Of Thermohygrometer
MFT-04 series using epoxy resin to seal the metal housings, with stable waterproof and moisture-proof performance, which can pass the IP68 waterproof requirements. This series can be customized for special high temperature and high humidity environment.
-
Digital Temperature Sensor For Boiler, Clean Room And Machine Room
The DS18B20 output signal is stable and does not attenuate over long transmission distances. It is suitable for long-distance multi-point temperature detection. The measurement results are transmitted serially in the form of 9-12-bit digital quantities. It has the characteristics of stable performance, long service life, and strong anti-interference ability.
-
Straight Probe Temperature Sensors
This probably one of the earliest types of temperature sensors, using a thermally conductive resin to fill and pot-seal various metal or PVC housings as temperature probes. The process is mature and the performance is stable.
-
Push-In Immersion Temperature Sensor for Coffee Machine
This temperature sensor used in commercial coffee machines, we started supplying in bulk to European customers 20 years ago, they provide consistent performance and fast response times.
-
Spring Clamp Pin Holder Plug and Play Wall Mounted Gas Boiler Temperature Sensors
This pipe-clamp spring-loaded temperature sensor is characterised by its design-required pin-socket plug-and-play type, with a form factor closer to a standard part which is equally suitable for heating boilers and domestic water heaters.
-
Threaded Plug In immersion Pin-Socked Mounted Gas Wall Mounted Boiler Water Heater Temperature Sensors
This threaded plug immersion pin-mounted gas wall mounted boiler water heater temperature sensor has been popular since 20 years ago, and is a relatively mature product. Each form factor is basically a standard part, and it is very convenient to plug and play.
-
Immersion Temperature Sensor for Gas Fired Heating Boiler
This sensor is originally designed for gas heating boiler applications, for temperature control and monitoring of liquids or coolants. High precision, fast response time, compact and easy to install.
-
A typical screw-in fluid temperature sensor for Wall Mounted Boiler
This sensor originally designed for use in gas boiler applications, they can be used anywhere that you want to sense or control temperature of a liquid in a pipe. Built-in NTC thermistor or PT element, various industry standard connector types are available.
-
TPE Overmolding Waterproof Temperature Sensor
This type TPE sensor is modelled after Semitec, features high accuracy with tight resistance and B-value tolerances (±1%). 5x6x15mm head size, parallel wire with good bendability, long term reliability. A very mature product, with a very competitive price.
-
One-piece TPE sensor with flexible ring fastener for measuring the temperature of water pipes
This one-piece TPE injection moulded sensor with flexible ring fasteners can be adjusted to suit the diameter of the water pipe and is used to measure the temperature of water pipes of different size.
-
TPE injection molding sensor with rolling groove SUS housing
This is a customised TPE injection moulded sensor with stainless steel housing, available in both flat and round cable, for use in refrigerators, low temperature and humid environment. Two rolling grooves make the waterproof performance better, stable and reliable.