Threaded Tube Immersion Temperature Sensor with a Molex male connector For Boiler,Water Heater

Short Description:

This immersion temperature sensor is threadable and features plug-and-play Molex terminals for easy installation and use. Available in direct temperature measurement media, whether water, oil, gas or air. The built-in element can be NTC, PTC or PT…etc.

Send email to us

Product Detail

Product Tags

Immersion Temperature Sensor with a Molex Minifit 5566 For Boiler,Water Heater

This temperature sensor for Boiler or Water Heater has a built-in element that can be used as an NTC thermistor, a PT1000 element, or a thermocouple. Fixed with threaded nut, it is also easy to install with good fixing effect. Can be customized according to customer's requirements, such as size, shape, characteristics, etc.

Features:

■ To install and fixed by screw thread , easy to install, size can be customized
■ A glass thermistor/PTC thermistor/PT1000 element is sealed with epoxy resin, moisture and high temperature resistance
■ Proven long term Stability and Reliability ,wide range of applications
■ Excellent performance of voltage resistance.
■ Usage of Food-grade level SS304 housing, meet the FDA and LFGB certification.
■ Products are in accordance with the RoHS, REACH certification.

Applications:

■ Boiler, Water Heater, Hot water boiler tanks
■ Commercial coffee machine
■ Automobile engines (solid), engine oil (oil), radiators (water)
■ Soybean milk machine
■ Power system

Characteristics:

1. Recommendation as follows:
R60℃=10KΩ±3%,
R25℃=12KΩ±3%, B25/100℃=3760K±1%
2. Working temperature range:
-30℃～+125℃
3. Thermal time constant: MAX10 sec. ( typical in stirred water )
4. Insulation voltage: 1800VAC,2sec.
5. Insulation resistance: 500VDC ≥100MΩ
6. PVC, XLPE or teflon cable is recommended
7. Connectors are recommended for Molex minifit 5566, PH, XH, SM, 5264 and so on
8. Above characteristics all can be customized